RahmenGambler Alloy 6061
Hydroformed custom butted
PF BB107 / IDS-X DH 12x150mm Dropout
BB height adjustable
ISCG05 / 210mm rear travel
GabelFOX 40 RC2 Factory 27.5″
203mm travel / Kashima / Air
Hi-Lo Comp / Rebound
20mm thru axle / Alloy steerer
DämpferFOX DH X2 Coil Kashima
Independent high/low comp. and rebound / RVS
custom tuned / 241x76mm
Spring rates S: 400 / M: 450 / L: 500
SteuersatzSyncros DH adjustable
Semi integrated / adj +-1° or +-2° with cup
ID 49.6mm / OD 55mm
SchaltwerkSRAM XO1 DH
Short cage / 7 Speed
SchalthebelSRAM XO1 DH
Trigger Shifter / 7 Speed
BremshebelSRAM Code RSC
BremsenSRAM Code RSC
4 Piston / 200mm / centerline rotor
KurbelsatzRace Face Atlas
36T Alloy Chainring DM / 165mm
KettenführungE.thirteen LG-1+ ISCG05 / w/Taco Alloy backplate
InnenlagerRace Face BB107
35mm / 800mm / 20mm Rise
Syncros Pro DH dual lock-on grips
35mm / Direct Mount 45-50mm ext.
SattelstützeSyncros DH1.5 / 31.6mm / Alloy7050
SattelSyncros Tofino 2.0 / CrMo Rails
WheelsetSyncros Revelsoke DH1.5 / 110×20 front / 150×12 rear / 27.5″ / 32H / Tubeless Ready Rims
KassetteSRAM CS PG-720 DH 11-25
BereifungSchwalbe Downhill Evolution Line
Magic Mary 27.5×2.35″ Addix Soft
Gewicht in Kg (ca.)16.90
Gewicht in Lbs (ca.)37.26
Adjustable BB Height
The BB height on the Gambler 700 is adjustable by 10mm to accommodate for rider preference as well as wheel size. If you want to set up your rig to carry speed through a corner with a low BB or to smash on the pedals to get back up to speed on a higher BB, you have the flexibility to choose.
With a 27.5 wheel set up, you can either have a 343mm BB height in the low position with or a 353mm BB height in the high position, enabling the rider to pick from a low and slack carver of a bike or a pedal smashing flat track weapon. The 26 setup works much the same way with a 341mm BB height in the high position or a 331mm BB height in the low position.
Adjustable Head Angle
The Gambler 700 has a stock head angle of 63 degrees. Thanks to the provided Syncros Angled Headsets in 1 degree and 2 degrees you have access to a range 61 degrees to 65degrees. This range of head angles provides the opportunity to choose the ideal setup for any racer on any track. Horses for Courses.
Chain Stay Length Adjustment
Adjustability has always been one of the Gamblers strong points over the years. The Gambler 700 is no different. The rear end has two chainstay length settings, providing for ideal setups anytime, anywhere. In the low BB setting, the longer 440mm setting is designed to work best for high speed tracks or riders who like a planted rear end. The @Brendog1 approved, shorter 425mm chain stay setting gives the bike a lively feel and works better on tighter tracks. With the higher BB setting, the available chain stay lengths are 421mm and 435mm.
The heart of the Gambler is the Floating Link. Combining just the right amount of support with incredible comfort at high speeds, the linkage was optimized for use with the new FOX RC4. When FOX shifted to the smaller shaft on the RC4 we realized that a new kinematic was necessary. The Floating Link pivots around an imaginary floating point allowing the designers to fine tune all aspects of the leverage ratio enabling the shock and linkage to function in glorious harmony.
This linkage allowed the engineers to decrease the shock hardware rotation from 36 degrees to 9 degrees on one end and 12 degrees down to 4 degrees on the other end. This not only increases durability but also improves small bump sensitivity. Furthermore, unlike most bikes on the market, the bearing loads are drastically decreased at the beginning of the shock stroke further enhancing traction performance.
IDS-X Dropouts: Simpler, Stiffer, Lighter
The IDS-X Dropouts have a unique axle and dropout interface which locks the axle into place. This design eliminates the need for pinch bolts on the rear axle. We were tired of the rear ends of bikes coming loose after long days in the bike park so we set out to find a solution. After many one off prototypes we found this solution in the form of eccentric and conical shapes on the axle and dropouts. These shapes key into each other and lock the rear end down tight. In addition, the stiffer feeling rear end provides for better and more consistent cornering traction over traditional axle/dropout designs.
Integrated Fork Bumpers
The integrated fork bumpers on the Gambler 700 not only protect the cables from getting pinched by the fork in a crash but also protect the frame from the fork in that very same crash. Gone are the days of dimpled top tubes and pinched cables. Lighter, simpler and no room for error- these are the principles behind the new Gambler 700 fork bumpers.
Tracks differ, as do riding styles and riders. With that idea in mind, we tried to design a bike that allows you to decide on set up based on your specific needs. With the available geometry adjustments the Gambler can have almost the same geometry with either wheel size. Thanks to adjustable BB heights, chainstay lengths and head angles we were able to create a seriously fast bike regardless of whether you want to run 26″ or 27.5″ wheels. Why compromise if you don’t have to?
|LOW BB Setting||HIGH BB Setting||LOW BB Setting||HIGH BB Setting||LOW BB Setting||HIGH BB Setting|
|A||head tube angle||63.0 °||63.7 °||63.0 °||63.7 °||63.0 °||63.7 °|
|B||head tube length||115.0 mm||4.5 in||115.0 mm||4.5 in||115.0 mm||4.5 in||115.0 mm||4.5 in||115.0 mm||4.5 in||115.0 mm||4.5 in|
|C||top tube horizontal||549.7 mm||21.6 in||546.2 mm||21.5 in||595.4 mm||23.4 in||591.5 mm||23.3 in||633.6 mm||24.9 in||629.3 mm||24.8 in|
|D||standover height||778.6 mm||30.7 in||783.6 mm||30.9 in||771.6 mm||30.4 in||777.1 mm||30.6 in||765.3 mm||30.1 in||771.3 mm||30.4 in|
|E||BB offset||-13.0 mm||-0.5 in||-3.0 mm||-0.1 in||-13.0 mm||-0.5 in||-3.0 mm||-0.1 in||-13.0 mm||-0.5 in||-3.0 mm||-0.1 in|
|F||BB height||343.0 mm||13.5 in||353.0 mm||13.9 in||343.0 mm||13.5 in||353.0 mm||13.9 in||343.0 mm||13.5 in||353.0 mm||13.9 in|
|G||wheel base||1,175.8 mm||46.3 in||1,172.5 mm||46.2 in||1,205.8 mm||47.5 in||1,202.5 mm||47.3 in||1,235.8 mm||48.7 in||1,232.5 mm||48.5 in|
|H||BB center to toptube center||336.0 mm||13.2 in||336.0 mm||13.2 in||333.0 mm||13.1 in||333.0 mm||13.1 in||331.0 mm||13.0 in||331.0 mm||13.0 in|
|I||BB center to top of seattube||406.0 mm||16.0 in||406.0 mm||16.0 in||404.0 mm||15.9 in||404.0 mm||15.9 in||403.0 mm||15.9 in||403.0 mm||15.9 in|
|J||seat angle||75.1 °||75.9 °||73.7 °||74.6 °||73.0 °||73.9 °|
|K||chainstay||425.0 mm||16.7 in||421.5 mm||16.6 in||425.0 mm||16.7 in||421.5 mm||16.6 in||425.0 mm||16.7 in||421.5 mm||16.6 in|
|L||reach||385.0 mm||15.2 in||393.0 mm||15.5 in||415.0 mm||16.3 in||422.8 mm||16.6 in||445.0 mm||17.5 in||452.6 mm||17.8 in|
|M||stack||616.7 mm||24.3 in||611.7 mm||24.1 in||616.7 mm||24.3 in||611.4 mm||24.1 in||616.7 mm||24.3 in||611.2 mm||24.1 in|
|N||stem length||50.0 mm||2.0 in||50.0 mm||2.0 in||50.0 mm||2.0 in||50.0 mm||2.0 in||50.0 mm||2.0 in||50.0 mm||2.0 in|
Egal ob auf World Cup-Tracks oder durch die Canyons von Utah: Unsere Bikes sind für Freerider und Downhiller konzipiert, die nichts abschreckt.